Name: Automotive Electronic Faults Detector MST-101
Description:
Master MST-101 Car Electronic Faults Detector is using advanced technology from Germany. Master MST101 can collect and analyze signals under non-dismantle automotive electrical parts. Testing results are showed by LED indicators and beeper. Easy to know if there is faults of the automotive electronic parts.
Test Range:
Ignition Coil(Traditional Coil, Double Spark Coil,Single Spark Coil), Generator, Fan, Electric-Magnetic Valves, Emission Gas Controlling Value, Fuel Injectors, Relay, etc.
Safe Operations:
1. The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine.
2. The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur explosive air, so it is very necessary to prepare fire extinguish gears accordingly.
3. During test process, it is necessary to avoid the moving parts and heat source to protect tester and testing equipment.
4. To be far away from the cooling fan of engine.
5. Do not put other equipment on the battery which is possible to make the battery inside to be Short, which may cause hurt or damage of tester and equipment.
6. Do to turn off the ignition switch before connecting or remove electrical parts.
7. Do not leave the car during the test.
8. Please confirm the gear position of the car: automatic is at P; manual is at N; Do push tight of hand brake; put blocks in front of the driving tyre.
9. Please read relative warnings from car manufacturer, pay attention to the important warning information.

|